Difficulty Rating (one hammer is least difficult, four hammers is most difficult)
The finished Hutch measures about 76 inches high and about 31 inches wide. The lower section provides
more than 15 inches of depth for storage; the upper, more than 11 inches.
It is constructed in two sections, making both assembly and moving easier. The lower section is fitted with an adjustable shelf. Two shelves above have grooves near the back to hold
plates upright.
Both sections are basic boxes constructed from 3/4-inch-thick birch plywood. Solid maple trim at the
top and bottom adds simple decoration. The solid maple doors have traditional mortise-and-tenon
joints for strength. After assembly, the frames are routed on the back to accept birch panels or
glass.
Tools needed include a table saw and router. If you cut the joints the traditional way, you'll need
a handsaw and selection of chisels. To save time, cut the mortise pockets using a straight bit and
router table. The plans explain both methods.
We gave this example a reddish brown stain for the look of cherry. For ease of application, we used
a no-drip gel stain and then a gel varnish. As an alternative, the piece could be painted.
If you have any questions concerning project plans, please send us an e-mail.
